The main advantage of a pre-finished two-layered parquet floor is that it has a birch plywood backing that neutralises the natural movements of the noble wood. This valuable technology allows you to choose the type of wood exclusively according to your taste and needs. Therefore the choice of the type of wood for your parquet will be based on aesthetic and design evaluations, since durability and performance are guaranteed and certified on all the products of the Alberani Parketti Collection.Discover the essences from all over the world and choose the tone of colour, brightness and design of the different grains. Our original workmanship and finishes will make your parquet unique.

For a correct installation of parquet, it is sufficient to observe a few simple but fundamental rules.
Mainly check that the humidity of the substrate does not exceed 2.5% by weight.
Should this limit be exceeded, it must be adjusted accordingly. The substrate must be clean, compact and free of cracks to facilitate the glues grip. When laying pre-finished wooden floorings, the humidity must be between 8% and 10%. Wooden floorings require environmental conditions free of excess humidity. It is advisable to store the parquet (boxed) in the rooms where it is to be installed in order to allow it to balance with the environmental conditions. For pre-finished parquet, a few days are sufficient to ensure this acclimatisation.
Only use eco-friendly mono or two-component polyurethane glues, which respect the environment and your health.
For a correct maintenance, the rooms temperature must be of about 18-21 ° C, with an environmental humidity of about 55%.

Thanks to a centesimal tongue-and-groove joint system, our wooden flooring can be either glued or floating using an underfloor mat.
The installation by gluing is the most common type and is the one to be preferred to ensure a perfect solidity of the floor. It is easier to sand and is the recommended installation system in case of underfloor heating.
Floating laying with an underfloor mat is instead more suitable to preserve the existing floor underneath, to avoid an irregular substrate or in case of humidity slightly above the recommended threshold. In all these cases choosing the right mat is fundamental.

It is very important that work on laying the parquet floor begins after all other work has been completed, in particular work on exterior windows and doors, plasterboard, plaster, installations and ceramics.
The installation of the parquet floor may be followed by the installation of the interior doors, the kitchen and the touching up of the wall paintings on the lower walls. In these cases, it is advisable to cover the installed floor with specific protection.

Covering the outdoor areas of your home with wood, whether in gardens, poolside areas or terraces, is a stylish choice that adds elegance and value to the environment, while preserving the practicality and functionality required for an outdoor environment.
One of the most suitable wood species for outdoor wooden floors (decking) is Teak, a wood species with exceptional natural water-repellent properties and mechanical resistance. The application on the Teak decking of a finish with oil or vegetable resins for nautical use raises the level of protection of the parquet, keeping it cared for over time and protected from greying and wear.
Generally speaking, decking is made up of solid wood planks with a minimum thickness of 20 mm, widths varying from 90 to 120 mm, and lengths varying from 1800 to 2500 mm.
Alberani Parketti’s creativity and innovation have allowed the company to present to the market the two-layer Decking Plus Teak, composed of noble Teak wood glued to resin-coated marine plywood, a highly appreciated, high-performance and technological product.
Other woods suitable for outdoor flooring include Ipè Lapacho, Angelim Amargoso, thermo-treated pine and ash, Iroko.